|
|
LOW VOLTAGE, programmable, switch mode DC Power Supplies
SERIES LAB/HP & LAB/SM
3kW to 45kW
Output Voltage Ranges from 0 - 20VDC to 0 - 600VDC
Output Current Ranges from 0 - 8A to 0 - 1,120A
DESIGN EXAMPLES
|  |
|
FEATURES
100kHz MOS / IGBT technology
Optional 0-10V Analog Programming
Optional RS 232 computer interface
Optional IEEE-488.2 computer interface
Up to 94% efficiency at full load
Constant Voltage (CV) and Constant Current (CC) modes
Over-Voltage, Over-Current and Over-Temperature protection
Digital display of all system parameters
Very fast voltage drop compensation response time on load lines
Forced air cooling (front to back)
____________________________________________________________
GENERAL SPECIFICATION
Mains / Input Voltage: 3 x 480VAC or 3 x 208VAC, 3-Phase, 60Hz
(world-wide input voltages are available on request)
Voltage Regulation: ± 0.05% +2 mV
Current Regulation: ± 0.1% +2 mA
Stability: 0.05%
Ripple: < 0.025% rms (Type LAB/HP), < 0.2% rms (Type LAB/SM),
Setting resolution: 0.01%
Response Time: < 0.5 ms
Over Voltage Protection: Adjustable between 105% and 110% of max. output voltage
Operating temperature: 0 to +50° C, optional -20 C to + 50° C
DETAILED SPECIFICATION ARE AVAILABLE UPON REQUEST |  |
|
NOTE: Above output voltage & current ranges are standard, most commonly output
ranges and can be changed according to customer specific requirements at no extra cost. |
|
|
